Back to blog
Jobs, stock and customers

Rental property inspection checklist: move-in, move-out and routine

A printable rental property inspection checklist for landlords: move-in and move-out side by side, a routine list, wear vs damage, and state entry rules.

Start from the work orders template

Take requests, assign jobs, track them to done.

Use the template, free
On this page

A rental property inspection checklist is a room-by-room list of what condition each item is in, filled out at move-in, again at move-out, and on routine visits in between. Walls, floors, windows, locks, appliances, plumbing and alarms each get a mark and a photo. Both sides sign the move-in sheet, and the move-out sheet is judged against it.

Print this page and use the tables below, then read on for wear vs damage, a routine list, apartment buildings and state rules. Voucher tenant? That’s a different inspection: see our Section 8 inspection checklist. Repairs you find become jobs with a person and a due date in a work order template, covered at the end.

How we researched this: November 2026, in Florida Statutes 83.49 and 83.53, California’s Department of Real Estate 2026 tenant guide (which cites Civil Code 1954 and 1950.5), the Texas State Law Library’s deposit guides (which quote the Property Code) and the U.S. Environmental Protection Agency (EPA). Rules vary by state and city. This isn’t legal advice.

What goes on a rental property inspection checklist?

The same list, in the same order, every time, so at move-out you compare line by line with what you wrote at move-in. Each row has two boxes, move-in first (In), then move-out (Out). Tick a box if the item is fine; if not, write what you see next to it (“3 nail holes, north wall”). Date and sign the top of each printout, and photograph each room and anything that isn’t fine. Add lines for what your lease promises and cut what isn’t there.

The whole unit

CheckIn / Out
Keys, fobs, openers (count)☐ # / ☐ #
Locks and deadbolts☐ / ☐
Smoke and CO alarms (press test)☐ / ☐
Thermostat and heat☐ / ☐
Air conditioning, if provided☐ / ☐
Water heater: hot, no leaks☐ / ☐
Meter readings, if you bill them☐ # / ☐ #
Damage already there☐ # / ☐ #

Kitchen

CheckIn / Out
Walls, ceiling, paint☐ / ☐
Floor☐ / ☐
Counters and cabinets☐ / ☐
Sink and faucet, leaks below☐ / ☐
Stove and oven, clean inside☐ / ☐
Refrigerator, if provided☐ / ☐
Dishwasher and disposal☐ / ☐
Outlets, switches, lights☐ / ☐

Bathroom

CheckIn / Out
Walls, ceiling, mold-like spots☐ / ☐
Floor, tile, grout☐ / ☐
Toilet: flushes, no rocking☐ / ☐
Sink and vanity, leaks below☐ / ☐
Tub or shower: drain, caulk☐ / ☐
Exhaust fan or window☐ / ☐
Outlets and lights☐ / ☐

Living areas and bedrooms

Repeat this table for each room.

CheckIn / Out
Walls and paint☐ / ☐
Ceiling: stains, cracks☐ / ☐
Floor or carpet☐ / ☐
Windows: open, lock, screens☐ / ☐
Doors and closets☐ / ☐
Blinds you provide☐ / ☐
Outlets, switches, lights☐ / ☐

Outside, for houses

CheckIn / Out
Entry door, steps, railings☐ / ☐
Yard, fence, gates☐ / ☐
Garage or parking space☐ / ☐
Mailbox, numbers, outdoor lights☐ / ☐
Gutters and downspouts☐ / ☐

Most rentals built before 1978 are covered by a federal rule (the EPA lists a few exemptions): give the tenant the EPA’s lead pamphlet and a lead disclosure before they sign the lease, and keep a signed copy for three years after the lease begins (EPA: real estate disclosures about potential lead hazards). Put it in the lease packet, not the walk-through.

How do you do a move-in inspection?

Do it with the tenant, in the empty unit, before they move anything in. Plan 30 to 45 minutes for an apartment and 45 to 60 for a house with a garage and yard.

  1. Clean first. A unit that is clean on day one is a unit you can ask to be clean on the last day.
  2. Walk it together, room by room, with the checklist.
  3. Write what you see, not “fine”: “Living room: carpet worn flat in front of the door, 2 small stains by the window.”
  4. Photograph each room, then each flaw close up with something for scale. Phones record the date in each photo’s details. Keep the originals.
  5. Both sign and date the sheet. The tenant keeps a copy; you keep the original.
  6. Count the keys and write the number down.

California’s Department of Real Estate recommends the same in its tenant guide: walk the unit together, sign and date the inventory checklist, and each keep a copy (California Tenants, 2026 edition, “The Inventory Checklist”). For California tenancies that begin on or after July 1, 2025, the landlord must also photograph the unit before or at the start of the tenancy (pp. 36 and 90 to 91).

A note a stranger could use later beats a note that says “OK”:

WeakStrong
Walls OKNorth wall: 3 nail holes by the window, 4 in. scuff by the outlet
Carpet wornHallway carpet worn flat, 6 ft long, in the walking line
Stove cleanOven clean, no grease; photo 14

If damage is already there on day one, write it down and fix it, or note it as existing so it isn’t charged to the tenant later. At a building with several people doing walks, the manager does move-in and move-out and a tech does routine visits, so the same eyes judge both sheets.

What is normal wear and tear, and what is damage?

Normal wear and tear is what happens to a home that people live in. Damage is what carelessness, accidents or neglect do. The difference decides what you may take from a deposit.

Texas defines it: normal wear and tear is “deterioration that results from the intended use of a dwelling,” and it excludes deterioration from “negligence, carelessness, accident, or abuse.” A Texas landlord may not keep any part of a deposit for it (Property Code 92.001(4) and 92.104, as the Texas State Law Library’s guides quote them). California says the same in plainer words: the deposit can’t cover defects that were there before move-in, normal wear and tear, or cleaning a unit that is as clean as it was at move-in (DRE guide, p. 76).

In practice, with common examples (not a legal list; the facts of your unit decide):

It’s wearIt’s damage
Paint: faded by sun, small scuffsPaint: crayon, marker, an unapproved color
Walls: a few nail holesWalls: a fist-size hole
Carpet: worn flat in walking linesCarpet: pet stains, burns, tears
Floors: light scratchesFloors: deep gouges
Blinds: faded, one bent slatBlinds: missing or broken
Doors: loose hinge, sticky latchDoors: a hole, a broken frame
Drains: slow from ageDrains: clogged by what shouldn’t go down
Appliances: stop working from ageAppliances: broken by misuse
Cleaning: dust, light dirtCleaning: baked-on grease, trash left

Age matters too: after six years, carpet has had six years of use, and your move-in sheet says how it started.

How do you do a move-out inspection?

Use the same sheet, in the same order, with the move-in column next to it. Do it as soon as the tenant hands back the keys, with the tenant there if you can.

  1. Print the move-in sheet and walk the unit with it in hand.
  2. Fill in the move-out column line by line. Write what you see, not what it will cost.
  3. Photograph each room again, from the same spots as before.
  4. Mark each flaw: already there, wear, or damage.
  5. Price only the damage, with a quote or receipt for each item.
  6. Send the itemized list and any refund before your state’s deadline.

If the tenant won’t walk it with you, do it alone, date your photos and send a written notice of the date and time you inspected. Here’s one example of the math, for unit 4 at Maple Court, with made-up amounts. The deposit was $1,400.

Finding at move-outCharge
Hallway carpet worn flat (wear)$0
Faded paint by the south window (wear)$0
3 nail holes, north wall (wear)$0
Fist-size hole in bedroom door (damage)$185
Baked-on grease in oven, clean in photo 14 (damage)$60
Cracked bathroom sink (damage)$210
Total charged$455

The refund is $1,400 minus $455, or $945. Repainting faded walls and shampooing worn carpet for the next tenant is ordinary turnover, so that cost is yours.

California adds a step worth copying even where it isn’t required. A California tenant may ask for an initial inspection in the last 14 days of the tenancy, and the landlord must give at least 48 hours’ written notice of the date, then give the tenant an itemized list of repairs and cleaning so the tenant can fix them first. Since 2025, a California landlord must also photograph the unit after the tenant leaves and before any repairs or cleaning it will charge for, and again after they’re done (DRE guide, pp. 76 and 79 to 81).

How often should you inspect a rental property, and what do you look for?

Beyond move-in and move-out, many landlords look at each unit once or twice a year. Your lease and your state decide what you may do, not habit. The visit is for catching small things, like a slow leak or a dead smoke alarm, before they cost money.

At about 30 minutes an apartment, 20 units is 10 hours a round, so 20 hours if you go twice a year. Do it in the same two weeks each spring and fall, and fold in seasonal jobs such as furnace filters before winter and gutters after the leaves drop. Our preventive maintenance checklist lists jobs to add.

Print this one for routine visits.

Look atCheck
☐ Smoke and CO alarmsTest button; nothing missing
☐ Under sinks, around toiletsDrips, soft cabinet floors
☐ Water heater or boilerLeaks, rust at the base
☐ Heating and coolingRuns; filter clean
☐ Ceilings and wallsWater stains, mold-like patches
☐ Windows and doorsClose, lock, seals, screens
☐ Outlets near waterGFCI test and reset buttons work
☐ FloorsNew pet damage, burns, tears
☐ PestsDroppings, chewed holes
☐ Dryer vent, exhaust fansLint buildup, clogs
☐ Lease itemsPets, smoking, unapproved changes

Routine visits are where entry rules bite, so give notice in writing: the date, the time window and why.

How do you inspect an apartment building with 60 units?

Add the parts of the building that nobody rents, and plan the hours. Walk common areas once per building per round, and keep a separate sheet for them.

Common areaCheck
☐ Hallways and stairwellsLights work; exits clear
☐ Fire extinguishersIn place; tag current
☐ Sprinkler heads, if anyNot blocked or painted
☐ Entry doors, locks, intercomClose, latch, work
☐ Laundry roomMachines, vents, leaks
☐ Trash areaLids, pests, overflow
☐ Parking lot and walkwaysLights, trip hazards, potholes
☐ Boiler or mechanical roomLeaks, noises, access

At 60 units and 30 to 45 minutes each, a round is 30 to 45 hours; twice a year is 60 to 90. Split between two techs, that’s about 15 to 23 hours each per round: a couple of weeks of mornings, one building at a time. When one unit shows pests or a leak, check the units above, below and beside it, since the cause is often shared.

For the monthly and yearly extinguisher checks, see our fire extinguisher inspection checklist. For a walk-through that ends in a list of fixes, see our punch list template.

What do state laws say about entry notice and deposit deadlines?

They differ by state, so look up yours. Here are three examples, from each state’s own code or its agency’s guide.

StateEntry and deposit
CaliforniaEntry: 24 hours’ written notice presumed reasonable. Deposit: 21 days
FloridaEntry: 24 hours for repairs. Deposit: 15 days, or 30 to send a claim
TexasEntry: check the lease. Deposit: 30 days after the tenant surrenders the unit

California. A landlord may enter only for listed reasons, such as an emergency, necessary or agreed repairs, showing the unit, or a tenant-requested initial inspection, and “does not have the right to enter to conduct a general inspection.” Written notice states the date, approximate time and purpose, and entry is during normal business hours. The deposit, or an itemized statement with photos and any refund, is due within 21 days of move-out (DRE guide, pp. 48 to 50 and 76; the rules are in Civil Code 1954 and 1950.5).

Florida. For repairs, “reasonable notice” is at least 24 hours, and a reasonable time is between 7:30 a.m. and 8 p.m. For an inspection, the tenant may not unreasonably withhold consent, and the landlord may not abuse the right of access (Florida Statutes 83.53). With no claim, return the deposit within 15 days. To claim any of it, send written notice within 30 days, by certified mail or by email under section 83.505. The notice must say the tenant has 15 days after receiving it to object in writing, and a landlord who misses the 30 days forfeits the right to claim against the deposit (Florida Statutes 83.49).

Texas. The refund or the itemized list of deductions is due on or before the 30th day after the tenant surrenders the unit (Property Code 92.103), and the duty starts once the tenant gives a written forwarding address (92.107) (Texas State Law Library). We didn’t find a statewide entry-notice rule on that library’s pages, so read the entry clause in your lease.

Other states differ, and some require a written move-in checklist before you can keep a deposit. Start at your state attorney general’s or housing agency’s landlord-tenant page, then check your city.

How do you keep inspection records and follow up on repairs?

The checklist is the easy part. What fails is what comes after: repairs living in a text thread, a note, a photo you can’t find.

  • Paper in a binder, photos in a folder per unit. Free. Works for a few units if you name photos by date and room.
  • A spreadsheet. One row per finding: unit, item, mark, cost, who, done. Fine until two people edit it.
  • Property software. If you already use property maintenance software, check whether it keeps a move-in sheet and repair list per unit.
  • A work order for each repair. A person, a priority, a due date and what was done, so nothing is “I’ll get to it.” Tenants who report problems between visits can use a maintenance request form.

Turn every repair you find into a work order with GoodTaco

Take the Maple Court move-out. Six items and a turnover list: rekey, touch up paint, replace the door, clean the oven, replace the sink, test the alarms. In GoodTaco’s work order template each one is a work order with a number, a person and a due date, not a line in a text thread. Sign up free and you land in your own copy with sample jobs to look at. Delete them, add your buildings, then type the unit number on each job.

  • Every repair gets an owner and a due date. Pick a priority and the due date fills in: Urgent the same day, High the next day, Normal within 7 days and Low within 14. You can change the date. For a true emergency, such as a gas smell, phone someone first, then log it as Urgent.
  • Each property keeps its history. Open a building and you see its open work orders and recent finished ones. Finishing a job asks what was done and, if you want, the hours and the parts cost, a record to keep with the deposit statement.
  • My work lists one technician’s jobs, most pressing first, in any phone’s browser.
  • Tenants can report problems between visits. Publish the app with its public link, then share the request link, one for each building. Only people signed in to your GoodTaco workspace can open the board and the work orders. Anyone else who has the link gets the request page and nothing more.
  • Routine checks get a due date. Add a repeating job for alarm tests or filter changes. Each work order is created a set number of days before it’s due (7 by default) when someone on your team who can edit opens the app.

To add the inspection itself, ask GoodTaco in plain words:

Add a “Move-out inspection” page for each unit with the kitchen, bathroom, living area and whole-unit checklists. Each item has a move-in and a move-out condition and a note, and each item marked damage can become a work order for that unit.

You can also ask for a small photo on each item. Every version is saved, so you can roll back with one click. The app opens in any browser, including a phone’s.

Already keep your units and repairs in a spreadsheet? Upload the Excel or CSV file with spreadsheet to app, and the records go into the app’s own built-in database.

GoodTaco is free to start. Paid plans start at $9 a month, and Pro at $49 a month includes 10 users; bigger teams talk to us about Enterprise.

Get every repair you find a person and a due date. Start free, no credit card needed.

Frequently asked questions

What should be on a rental property inspection checklist?

Every room, in the same order, with a condition for each item: walls, ceilings and floors, windows and doors, locks, outlets, lights, appliances, plumbing, and smoke and carbon monoxide alarms. Add a line for keys, meter readings and any damage already there. Fill it out at move-in and again at move-out, and have both sides sign and date it.

How do you do a move-in inspection as a landlord?

Walk the empty unit with the tenant before they move anything in. Write the condition of every item on the checklist, take dated photos of each room and of any damage, and have both of you sign and date it. Give the tenant a copy and keep one yourself. Do it before the keys change hands, so the paper shows the day the tenancy began.

What is the difference between normal wear and tear and damage?

Normal wear and tear is the deterioration that comes from ordinary use of a home, such as faded paint or carpet worn along a walkway. Damage comes from carelessness, accident, abuse or neglect, such as a hole in a door or a burn in a counter. Texas defines it this way in Property Code 92.001(4), and a landlord there may not keep any deposit for normal wear and tear. California's deposit law draws the same line.

How often should a landlord inspect a rental property?

No single number fits every state. A common routine is a look once or twice a year, plus move-in and move-out, but your lease and your state's entry rules decide what you may do. In California, a landlord has no right to enter just to do a general inspection, so routine visits there need the tenant's agreement or a listed reason. Plan 30 to 45 minutes for an apartment and 45 to 60 for a house with a garage and yard.

How much notice must a landlord give before an inspection?

It depends on the state and on why you are entering. California generally treats 24 hours of written notice as reasonable for the entries it allows, such as repairs, showings or a tenant-requested move-out inspection, and limits entry to normal business hours; it gives no right to enter for a general inspection. Florida sets 24 hours' notice for repairs, between 7:30 a.m. and 8 p.m.; for an inspection it asks for the tenant's consent, which may not be unreasonably withheld. For Texas we found no statewide notice rule on the State Law Library's pages, so read the entry clause in your lease.

How long does a landlord have to return a security deposit?

California gives 21 days after move-out. Florida gives 15 days to return the deposit if there is no claim, or 30 days to send a written notice of a claim; miss that and you lose the right to claim against the deposit. Texas gives 30 days after the tenant surrenders the unit, and the duty is tied to the tenant giving a forwarding address in writing. Other states differ, so look up yours.

Can I use a free printable checklist, or do I need software?

A printed checklist and a phone for photos is enough for a few units. The weak spot is what comes after: repairs found at move-out or on a routine visit that get lost in a text thread. A work order for each one, with a person and a due date, closes that gap.

Free template

Start from the work orders template

Get your own copy of a working work orders app with sample records, ready to make yours. Free to start.

Use the template, free

Or turn your own sheet into an app

Keep exploring

Related guides and templates

View all articles

Guide

Roof inspection checklist: residential and commercial

Print a free roof inspection checklist for shingle, metal and low-slope roofs, with the findings report to hand the owner and how to turn findings into jobs.

Guide

Preventive maintenance checklist and schedule template

Copy a preventive maintenance checklist for HVAC, life safety, plumbing, grounds and vehicles, plus a PM schedule template that flags what's overdue.

Guide

Equipment maintenance log: fields and a fleet spreadsheet

What to record in an equipment or vehicle maintenance log, a filled-in fleet example, a spreadsheet layout to copy, and the federal record rules for trucks.

Industry

Supply Chain Software Built From Your Spreadsheet

Build supply chain management software from the spreadsheets your team already runs, purchase orders, vendor tracking, risk flags. No ERP migration. Deploy in minutes.