Back to blog
Jobs, stock and customers

Roof inspection checklist for roofing contractors: residential and commercial

Print a free roof inspection checklist for shingle, metal and low-slope roofs, with the findings report to hand the owner and how to turn findings into jobs.

Start from the work orders template

Take requests, assign jobs, track them to done.

Use the template, free
On this page

A roof inspection checklist is the list a roofer works down on every roof: safety, the ground and eaves, the roof surface for its type, flashings, penetrations, drains, and the attic or ceilings. Each finding gets a photo, a location and a severity. The owner gets that as a report, and you get the repair or estimate.

On this page: a checklist to print (pages 1 and 2 for shingle and metal roofs, pages 3 and 4 for commercial low-slope roofs), the twice-a-year agreement visit, a report example and a storm sheet.

How we researched this: OSHA, NRCA, Elevate and IBHS pages, checked November 2026.

Keep your roofs in a spreadsheet? Upload it and see it as an app first.

What goes on a residential roof inspection checklist?

Print pages 1 and 2 of the download, or work from the tables here. Mark OK, Defect or N/A on every line, and skip the sections for roof types you aren’t on. Before you start, fill in the top of the sheet: inspection number, date, weather, property, owner, reason (estimate, storm claim, maintenance visit or sale), roof type, age, layers, pitch and size. For a storm claim, add the date of loss, claim number, carrier and adjuster.

Before you go up

CheckWrite it up if
☐ Ladder set up and securedIt doesn’t reach 3 feet above the edge, or the foot is unstable
☐ Edge and fall protectionNot in place for the roof’s height and slope
☐ Power lines and overhead hazardsWithin reach of the work area
☐ Skylights, openings and soft spotsNot marked before you walk

The rules behind those lines, in plain words. This isn’t legal advice; whether an inspection counts as construction or general industry work depends on the job, so ask OSHA or your safety lead.

RuleWhat it says
Ladders, 29 CFR 1926.1053Side rails reach 3 feet above the landing, or the ladder is secured at the top. The foot sits about one-quarter of the ladder’s working length from the wall.
Construction roofing, 29 CFR 1926.501(b)Fall protection at 6 feet or more above a lower level on low-slope, steep and residential roofs.
General industry, 29 CFR 1910.28Protection at 4 feet or more at an unprotected edge, with its own low-slope roofing rules in (b)(13).
State plansSome states run their own OSHA-approved programs and may have their own rules. Check yours.

From the ground and the eaves

CheckWrite it up if
☐ Roof lines and planesSag, a dip or a bow
☐ Gutters and downspoutsLoose, full, pulling away, or draining at the foundation
☐ Fascia, soffits and drip edgeRot, gaps or stains
☐ Soft metals and sidingDents or spatter marks that suggest hail

Asphalt shingle roofs

CheckWrite it up if
☐ Missing, cracked or lifted shinglesAny, and how many per plane
☐ Curling, blistering or bare spotsGranule loss down to the mat
☐ Exposed or popped nailsAny
☐ Ridge and hip capsCracked, loose or missing
☐ ValleysDebris, wear or lifted edges
☐ Flashings, pipe boots and chimneysRusted, split, dry-rotted or missing sealant
☐ SkylightsCracked, leaking or stained

IKO, a shingle maker, lists the same signs in its roof inspection checklist. After hail, ask the carrier whether it wants a hit count per slope, and note it in the test square line on the sheet (a 10 by 10 foot square).

Metal roofs

CheckWrite it up if
☐ Panel fastenersBacked out, missing or with failed washers
☐ Laps and seamsOpen, lifted or showing daylight
☐ Ridge, rake and eave trimLoose or bent
☐ Coating and panelsRust, scratches through the coating or dents

Attic and interior

CheckWrite it up if
☐ Sheathing and raftersDark stains, damp wood, sag, or daylight showing
☐ InsulationWet or matted
☐ Condensation or moldPresent
☐ VentilationBlocked intake or exhaust vents
☐ Ceilings and walls belowStains, bubbling paint or drips

These lines are our own checklist, not a code. The free checklists from Jobber and ServiceTitan cover much of the same ground.

What goes on a commercial low-slope roof checklist?

A commercial roof is a visit on a schedule, not a one-time estimate, and the building owner wants the record as much as the repair. This is pages 3 and 4 of the download.

How often. NRCA’s published guidance, repeated on Elevate’s page, is inspections at least twice a year, preferably in spring and fall, plus extra ones after severe weather such as hail, a hurricane or a tornado. Manufacturers add their own terms. Elevate, which makes commercial membranes, recommends at least one assessment a year by the licensed applicator that installed the roof, and asks that leaks or standing water on a roof under warranty be reported right away. Another maker’s terms will differ, so read each roof’s warranty.

What to bring. Last visit’s report and its open items, and a roof plan. Sketch the roof once, number the drains, curbs and units, and print a copy. “Seam, north unit curb” means something to the next crew; “seam, roof” doesn’t.

Top of the sheet: inspection number, date, property, roof ID or building, membrane type, size, age and last visit date. Then open items from the last visit: list each one and mark it closed or still open. That line is the point of an agreement visit: what changed since fall.

Roof access and safety

CheckWrite it up if
☐ Roof access, hatch or ladderDamaged, locked out or unsafe to use
☐ Edge and fall protectionNot in place for how close the work is to the edge
☐ Skylights, openings and soft spotsNot marked before you walk
☐ Building contact told you are on the roofNot done

Membrane and seams

CheckWrite it up if
☐ SeamsOpen, worn, lifted or gapped
☐ MembraneTears, punctures, blisters or splits
☐ Earlier repairs and patchesLifting, cracked or failed again
☐ PondingStanding water, or stains, algae or plants where it stood
☐ Soft spots underfootSpongy or soft areas, a sign of wet insulation: suggest a moisture survey
☐ Ballast, if the roof has stoneStones displaced or bare patches
☐ Walk pads and traffic pathsWorn through

IBHS, a property-loss research group, lists open or worn seams, lifting edges, tears, punctures and backing-out fasteners for single-ply roofs (TPO, EPDM, PVC). For built-up and modified bitumen roofs it says to check seam connections and flashing edges for excessive wear or gaps. Know your membrane type before you walk.

Flashings, curbs and penetrations

CheckWrite it up if
☐ Wall and parapet flashingsLoose, gapped, torn or pulling away
☐ Metal edge and copingLifted, loose or missing fasteners
☐ Curb flashingsGaps, leaks or deterioration
☐ Pipe, stack and pitch pan flashingsCracked, open or low on sealant
☐ Sealant at flashingsCracked, dried or missing
☐ Rooftop unitsNot strapped, bolted or anchored, or debris under them
☐ Skylights and roof hatchesCracked, leaking or stained curbs

IBHS calls metal edge flashing the leading cause of roof cover failure in high winds, so give the perimeter a hard look.

Drains and scuppers

CheckWrite it up if
☐ Roof drains, strainers and sumpsDebris or blocked
☐ Scuppers and linersDebris, loose or blocked
☐ Overflow drains or scuppersMissing, blocked or set too high
☐ Gutters and downspoutsLoose, full or not draining
☐ Water after a rainStill standing well after the rain stopped

Interior below

CheckWrite it up if
☐ Ceilings and walls belowStains, bubbling paint, drips or tenant reports

Close both pages the same way: a findings table, a photo taken of every finding, a recommendation, and whether the owner was told of urgent items.

What goes in a roof inspection report?

Your customer wants to know what’s wrong, how bad, and what it costs to fix. Each finding stands alone, so an owner can forward one line to a property manager or an insurer.

For each finding:

  1. A photo number. The inspection number plus a count, such as RI-3307-01. One overview shot of the roof plane, then a close-up.
  2. Where. The roof plane, or a spot on your roof plan.
  3. What you saw. One plain sentence.
  4. Severity. Our own three levels, below.
  5. What to do. Repair, replace, monitor, or have another trade look.
SeverityMeansDo
UrgentLeaking now, or unsafeTarp or repair now
Repair soonWill leak if leftQuote it, book it
WatchWorn but soundNote it, check next visit

IBHS tells owners to keep photos and contractor reports, because documented care supports warranty and insurance claims. For storm work, photograph before anything is moved, and ask the owner’s insurer what it needs. Insurers set their own rules, so don’t promise an outcome in the report.

An invented commercial example, RI-3307:

AreaFindingSeverity
SeamsOpen seam, 3 ft, at north unit curb (RI-3307-01)Repair soon
DrainsDrain D-2 clogged, ponding about 20 sq ft (RI-3307-02)Urgent
FlashingCounterflashing loose, east parapet (RI-3307-03)Watch
Rooftop unitsAnchors tight, curbs dryOK

How do you turn roof findings into an estimate or a repair job?

  1. Sort by severity. Urgent first. For a storm roof, the Urgent line is the tarp.
  2. Price the Repair soon items. Send the report and the quote together, so the owner can match photo numbers to lines.
  3. Put the Watch items on the next visit. The report shows what you’ll look at again.

If you use the work order template, our suggested mapping is Urgent to Urgent, Repair soon to High or Normal, and Watch to Low or no job. On paper, one folder per roof works for a while; our work order template comes in Word, Excel and PDF, and our free work order software guide compares free tools. For home checks on rentals, see the rental property inspection checklist.

Turn roof findings into repair jobs

RI-3307’s clogged drain should be fixed this week and the loose flashing watched until spring. GoodTaco’s work order template carries that: each building is a site, each roof is equipment, and each finding is a work order.

Add a Severity dropdown on each work order (Urgent, Repair soon, Watch), a Roof type dropdown on each piece of equipment (Asphalt shingle, Metal, Low-slope membrane), a Roof age field, an Inspection number field, a Quote amount field, and a Photo on each work order. Rename Equipment to Roofs and Sites to Properties.

  • Customers can report a leak from the request link once the app is published; you add repairs from the board. Only people signed in to your GoodTaco workspace can open the board and the work orders. Anyone else who has the link gets the request page and nothing more.
  • Priority suggests the due date. Urgent is due the same day, High the next day, Normal within 7 days and Low within 14. Assign a job and it shows in that person’s My work.
  • Each roof keeps its history, with its install date beside every job on it. Already have your roof list? Upload the spreadsheet and the records go into your app’s own built-in database.

GoodTaco is free to start. Paid plans start at $9 a month, and Pro at $49 a month includes 10 users; bigger teams talk to us about Enterprise.

Get every roof finding photographed, ranked and fixed. Start free, no credit card needed.

Frequently asked questions

What should be on a roof inspection checklist?

Safety first: ladder, edge protection, power lines and fragile spots. Then the ground and eaves, the roof surface for its type (asphalt shingle, metal or low-slope membrane), flashings, penetrations such as vent pipes and rooftop units, drains and gutters, and the attic and ceilings for signs of water. End with a photo for each finding, a severity and a recommendation.

How often should a commercial roof be inspected?

The National Roofing Contractors Association (NRCA) recommends inspecting at least twice a year, preferably in spring and fall, plus after severe weather such as hail or a hurricane. Warranties differ. Elevate, a commercial membrane maker, recommends at least one assessment a year by the licensed applicator that installed the roof. Read the warranty on each roof for its own terms.

What does a roof inspection report include?

The property address, the date, the inspector and the roof type and age, then the findings by area, each with a photo, a location on the roof and a severity. It ends with recommendations and who should do the work. Some checklists, such as Jobber's and ServiceTitan's, add a roof plan space or a sign-off line.

How do you inspect a flat or low-slope commercial roof?

Walk it with a plan of the roof. Check seams for open or lifted edges, the membrane for tears, punctures and blisters, perimeter and curb flashings, and drains for debris. Look for ponding water and rooftop units that aren't anchored. Photograph each finding and mark it on the plan. A property-loss research group, IBHS, says to keep the records.

Does OSHA require fall protection on roof inspections?

OSHA's construction rule, 29 CFR 1926.501, requires fall protection at 6 feet or more above a lower level for low-slope, steep and residential roofing work. Its general industry rule, 29 CFR 1910.28, uses 4 feet for unprotected edges, with its own roofing rules. Whether an inspection falls under the construction rule or the general industry rule depends on the work, so ask OSHA or your safety consultant before sending a crew up. Either way, an unprotected edge needs protection at 4 feet or more in general industry, or 6 feet or more in construction.

Can you inspect a roof from the ground?

You can find a lot. NRCA says a maintenance inspection of a steep-slope roof can typically be done from the ground or a ladder, and it does not recommend that inexperienced people walk on roofs. From the ground, look at the roof lines, gutters, eaves, flashings you can see and granules or debris at the downspouts. A roofer still needs to go up to see seams, penetrations and drains.

Do I need a roof inspection after a storm?

NRCA suggests an extra inspection after severe weather such as hail, a hurricane or a tornado. Photograph damage before anything is moved or repaired, and ask the property owner's insurer what documentation it wants.

Free template

Start from the work orders template

Get your own copy of a working work orders app with sample records, ready to make yours. Free to start.

Use the template, free

Or turn your own sheet into an app

Keep exploring

Related guides and templates

View all articles

Guide

Preventive maintenance checklist and schedule template

Copy a preventive maintenance checklist for HVAC, life safety, plumbing, grounds and vehicles, plus a PM schedule template that flags what's overdue.

Guide

Equipment maintenance log: fields and a fleet spreadsheet

What to record in an equipment or vehicle maintenance log, a filled-in fleet example, a spreadsheet layout to copy, and the federal record rules for trucks.

Guide

Forklift inspection checklist: the daily OSHA check

Print a daily forklift inspection checklist for electric and propane trucks, and see what OSHA requires, what it doesn't, and what to do when a truck fails.

Industry

Supply Chain Software Built From Your Spreadsheet

Build supply chain management software from the spreadsheets your team already runs, purchase orders, vendor tracking, risk flags. No ERP migration. Deploy in minutes.