Forklift inspection checklist: the daily check OSHA expects
Print a daily forklift inspection checklist for electric and propane trucks, and see what OSHA requires, what it doesn't, and what to do when a truck fails.
Start from the work orders template
Take requests, assign jobs, track them to done.
On this page
A forklift inspection checklist is the walk-around and short test an operator does before a truck goes into service: forks, mast and chains, tires, fluids and leaks, then brakes, steering, lift, horn and lights with the key on. OSHA requires it at least daily, and after every shift on round-the-clock trucks. A truck that fails stays parked.
It’s for the supervisor or safety lead at a warehouse, lumber yard, distributor or plant with a few electric and propane forklifts. Below: a checklist to print, what 29 CFR 1910.178 requires and doesn’t, and what to do when a truck fails.
How we researched this: OSHA’s rule text, letters and forklift pages, plus each app’s pricing page, checked November 2026. Not legal advice; your state may run its own program.
If failed checks get lost between the dock and the shop, skip to turning them into work orders.
For excavators, loaders and skid steers, see our heavy equipment inspection checklist. For a wider monthly walk-through of the site, see our OSHA inspection checklist.
What does OSHA require for a forklift inspection?
Three rules in 29 CFR 1910.178, OSHA’s rule for powered industrial trucks (forklifts, motorized hand trucks and similar machines), do the work:
- Examine it before use, daily. Each truck is examined before it’s placed in service, at least daily, and after each shift where trucks run around the clock ((q)(7)).
- A safety defect parks the truck. A truck with any condition that adversely affects safety isn’t placed in service, and defects must be reported and corrected right away. A defective or unsafe truck stays out of service until it’s restored to safe condition ((p)(1)). Repairs are made by authorized personnel: whoever you’ve named to repair trucks, such as your mechanic or the dealer, not the operator by default.
- Operators are trained and re-evaluated. Training covers any inspection and maintenance the operator will do, and each operator is evaluated at least once every three years ((l)(4)(iii)).
The rule doesn’t apply to farm vehicles or vehicles built mainly for earth moving or over-the-road hauling. On a construction site, the forklift rules sit in 29 CFR 1926.602(c). States with an OSHA-approved State Plan run their own programs, which must be at least as effective, so check yours.
Running two shifts or sharing trucks?
OSHA’s rule doesn’t give a number for a two-shift shop. It says at least daily, and after each shift on trucks used round the clock. Our advice: check a truck before each shift it’s used, one sheet per truck per shift, signed by whoever drives it. A truck passed on to a second crew has had eight hours of knocks and a different pair of eyes, and the first shift’s sheet can’t vouch for it.
Does OSHA require a written record of the daily check?
No. OSHA has said so in two letters of interpretation. A 2000 letter of interpretation is titled “Pre-operation forklift examinations are not required to be written.” It says there is no OSHA requirement that the examination be recorded in writing on a checklist. A 2004 letter adds that no specific checklist is required, but the employer must still make sure trucks are properly inspected.
| OSHA’s rule requires | OSHA’s rule doesn’t say |
|---|---|
| The check, before use and at least daily | That it be written down |
| Out of service when unsafe | Which checklist or form to use |
| Defects reported and corrected | How long to keep checks |
| Training and an evaluation every 3 years | Who does the check |
| A written certification of that training | Anything beyond “examined” |
Why keep a sheet anyway? OSHA’s forklift eTool says a defect should be recorded on a log and reported to a supervisor right away, and OSHA publishes sample daily checklists, though it calls them a training aid, not a substitute for the standards. A signed sheet also tells the mechanic what failed. The one record the rule does spell out is the operator certification: name, training date, evaluation date and who did the training. Pick a retention period for daily sheets and write it into your safety program; the rule sets none.
What goes on a daily forklift inspection checklist?
Print this page. Make one copy of the sheet per truck per shift, then mark OK or Defect beside every line below. The tables follow OSHA’s pre-operation guidance and its sample lists for electric and internal combustion trucks, which are the ones with an engine: propane, gas and diesel. Propane trucks use the engine checks too. Your operator’s manual adds what’s particular to your make.
FORKLIFT DAILY CHECK
Date: ______ Shift: ____
Truck #: ______
Type: [ ] Electric [ ] Propane
[ ] Gas [ ] Diesel
Hour meter: ________
Operator: ____________
Key off, key on: mark OK or
Defect on every line (tables
below)
Defects (part, what's wrong):
_____________________________
_____________________________
Safe to use? [ ] Yes
[ ] No, tagged out
Reported to: ________
Time: ______
Operator signature:
_____________________________
Repair: [ ] Fixed Date: _____
WO #: ______
Mechanic or supervisor:
_____________________________
Key off: every truck
Shut the truck off, set the brake, and walk around it.
| Check | Write it up if |
|---|---|
| ☐ Leaks under and on the truck | Fresh fluid on the floor, or wet hoses and fittings |
| ☐ Tires, cushion or solid | Worn to the wear line, chunking, tearing or flat spots |
| ☐ Tires, air-filled | Cuts, gouges, or pressure below the maker’s number |
| ☐ Forks, top clip pin and heel | A crack, a bend, wear past the maker’s limit, or a missing pin |
| ☐ Mast, chains, hoses and stops | Loose, kinked or rusty chains, or a leaking hose |
| ☐ Load backrest, overhead guard, finger guards | Missing, bent or loose |
| ☐ Capacity plate and warning decals | Missing, unreadable, or doesn’t match the truck’s attachments |
| ☐ Operator’s manual | Not on the truck |
| ☐ Seat belt or fall protection | Frayed, or doesn’t latch and release smoothly |
| ☐ Operator compartment | Grease, oil or debris on the floor or pedals |
| ☐ Hydraulic and brake fluid levels | Low |
Check chain tension with a stick or other tool, never with your hand in the mast.
Fork and tire limits come from the maker, so ask your dealer for yours. As a guide, fork maker Vetter says to replace a fork worn more than 10% thinner than new, which cuts its capacity by about 20%, and any fork with a surface crack. Look at the inner heel and the welds. Tip heights shouldn’t differ by more than 1.5% of blade length. Toyota lists wear past the molded wear line, chunking, tearing and flat spots as signs to replace tires. A cracked lens or a worn tire that isn’t at the line yet is the gray area: write it up and let the mechanic decide.
Key off: electric trucks add
| Check | Write it up if |
|---|---|
| ☐ Battery cables and connectors | Frayed or exposed wires |
| ☐ Battery restraints | The battery isn’t held down |
| ☐ Electrolyte level and charge | Low electrolyte, or too little charge for the shift |
| ☐ Hood latch | Won’t latch |
Key off: propane, gas and diesel trucks add
| Check | Write it up if |
|---|---|
| ☐ Engine oil and coolant | Low |
| ☐ Belts, hoses and radiator | Worn, cracked or leaking |
| ☐ Air cleaner | Restriction alarm on, or clogged |
| ☐ Hood latch | Won’t latch |
| ☐ Propane tank mounting and brackets | Loose, or the tank sticks out past the truck |
| ☐ Propane tank | Dents, cracks or corrosion |
| ☐ Pressure relief valve | Not pointing up |
| ☐ Propane hose and connectors | Damaged, or leaking |
Key on: every truck
Start it, move it a few feet in a clear spot, and test each control.
| Check | Write it up if |
|---|---|
| ☐ Accelerator and inching control | Sticks or jerks |
| ☐ Service brake and parking brake | Doesn’t stop or hold the truck |
| ☐ Steering | Loose, stiff or noisy |
| ☐ Forward and reverse | Hesitates, slips or grinds |
| ☐ Tilt, lift and lower | Jerky, or the forks drift down |
| ☐ Attachments | Don’t work smoothly |
| ☐ Horn, lights and back-up alarm | Any of them don’t work |
| ☐ Gauges, hour meter, battery indicator | A warning light is on; write down the hour meter |
| ☐ Cab heater, defroster and wipers, if fitted | Don’t work |
| ☐ Noise or vibration | Anything new: report it right away |
A dead horn is a safety defect, not a nuisance. The rule has drivers sound the horn at cross aisles and where vision is blocked ((n)(4)).
Want the road trucks and trailers? Our vehicle inspection checklist covers the walk-around for those. If you rent forklifts out, our guide to heavy equipment rental software covers the rental side.
How is an electric or propane forklift check different?
The operating checks match. What changes is the energy source, and the hazards that come with it.
Electric. OSHA’s eTool says to wear a face shield, rubber apron and rubber gloves when you check electrolyte. Charge batteries in a designated area with no smoking, open flames or sparks, and disconnect the battery before electrical repairs.
Propane. The eTool lists a face shield, long sleeves and gauntlet gloves for leak checks. No truck is operated with a fuel leak until it’s corrected, and tanks aren’t filled with the engine running ((p)(4)). Storage follows NFPA 58.
Gas and diesel. The same fuel rule applies, with liquid fuels handled to NFPA 30. A truck that runs hotter than normal in a way that creates a hazard, or throws hazardous sparks or flames from the exhaust, comes out of service until the cause is fixed.
Keep a separate printed sheet for each type, so an electric operator isn’t hunting past propane lines.
What do you do when a forklift fails the check?
The same steps work every time:
- Stop. Anything that affects safety keeps the truck parked. The rule names a fuel leak. In our view brakes, steering, forks, chains, tires, the overhead guard and a dead horn count too. A torn seat cover can wait.
- Park and tag it. Lower the forks, set the brake, take the key, and hang a dated “Out of service” tag on the steering wheel. OSHA’s rule requires taking the truck out of service; the tag is how everyone else knows. It’s a shop practice, not lockout/tagout: if someone works on the truck’s energy sources, your lockout/tagout program under 29 CFR 1910.147 may apply.
- Report it right away. To your supervisor, with the truck number, the part and what’s wrong. “FL-03 horn dead,” not “truck’s broken.”
- Turn it into a work order. One per defect, with a priority, a mechanic and a due date. An Urgent job is due the same day.
- Fix it with authorized personnel. Repairs aren’t an operator’s side job, and replacement parts must be equivalent in safety to the original design.
- Sign it off and take the tag down. Note what was done, and by whom. Our equipment maintenance log guide shows what each repair record holds.
Does OSHA expect more than the daily check?
Yes, but not more paperwork on the check itself. Around it:
- Operator evaluation every three years, plus refresher training after unsafe operation, an accident or near miss, a poor evaluation, a switch to a different type of truck, or a workplace change that affects safe operation .
- A certification for each operator, with their name, training date, evaluation date and who trained them .
- Clean trucks. Trucks are kept free of lint, excess oil and grease.
- Planned maintenance. The rule says nothing about hours between services. Your operator’s manual does, and our preventive maintenance checklist shows how to schedule it.
On top of that, give the supervisor ten minutes once a week with the stack of sheets. This is our suggestion, not an OSHA requirement, but it’s where the daily check pays off:
| Look for | What it tells you |
|---|---|
| A truck with no sheet on a day it ran | The check was skipped |
| A defect open more than a day | A repair has no owner |
| The same defect twice on one truck | A repeat failure: fix the cause |
| Tags still hanging | A truck that’s out, or a tag nobody took down |
| Hour meter against the service interval | A truck due for planned service |
| Operators nearing three years | Evaluations to schedule |
Example: a lumber yard with six forklifts (two propane, three electric, one diesel) and eight operators, one shift, files about 130 sheets a month: 22 working days times six trucks. A two-shift plant with 12 trucks files about 530.
Paper, form or app: what does a forklift inspection app cost?
For six trucks, a printed sheet works. A phone form or app earns its keep when sheets pile up unread, or you need to see which truck skipped its check. Prices below were checked on each company’s own pricing page in November 2026.
| Option | What it costs | Suits |
|---|---|---|
| Paper, OSHA’s sample lists | Nothing | One or two trucks, one shift |
| Google Form and Sheet | Responses go to a Google Sheet | Any size, if someone reads the sheet |
| Jotform | Free: 5 forms, 100 submissions a month. Bronze $39 monthly, $408 yearly | One form for any truck; the free plan runs out |
| Mitti | Free for up to 10 seats and 5 active templates. Premium $24 a seat monthly, billed yearly; $29 billed monthly | Phone checklists for operators |
| Fleetio | Essential $4 a vehicle a month yearly, $5 monthly; the page’s example assumes 5 vehicles | Forklifts tracked as vehicles |
| MaintainX | Basic free, with only 2 work orders that have attached procedures. Essential $20 a user a month yearly, $25 monthly | Checklists attached to work orders |
For the example yard: Mitti’s free plan fits eight operators and two templates, one electric and one engine sheet. If it were all on Premium, eight seats would be 8 × $24 × 12 = $2,304 a year. Fleetio Essential for six trucks is about 6 × $4 × 12 = $288 a year at the annual rate. Jotform’s free 100 submissions would run out after about 17 working days. Fleetio’s page says price also depends on fleet size, term and payment, so treat that figure as a starting point.
Others cost more per user or publish no price: GoCanvas is $29 a user a month billed yearly with a 3-user minimum, and Lumiform is quote only.
We’d look at Mitti’s free plan first for the check itself, and a work order tool for what happens after a defect. Our free work order software guide compares free plans.
Turn failed forklift checks into repair jobs
Prefer paper or a spreadsheet? Our free work order template comes in Word, Excel and PDF.
FL-03’s horn was caught at 6:42 am and fixed that afternoon because the defect became a job with an owner and a due date. GoodTaco’s work order template does that part. Sign up free and you land in your own copy, with sample records from a property maintenance team: clear them, then add your yard as a site and each forklift as equipment.
- A failed check becomes a work order. Operators send a defect from the template’s request link: pick the yard, type the truck number under “Unit or room”, tick “It’s urgent” if it is. It lands on the board, and accepting it makes a work order. Publish the app to get the link. Only people signed in to your GoodTaco workspace can open the board and the work orders. Anyone else who has the link gets the request page and nothing more.
- Priority sets the due date. Urgent is due the same day, High the next day, Normal within 7 days and Low within 14. The job shows in the mechanic’s My work, and goes on hold with a reason such as “waiting on a part.”
- Each forklift keeps its history. Open FL-03 and see every work order, with the hours and parts cost of the finished ones.
Ask GoodTaco to add what makes it read like your yard, including the daily check itself:
Add Forklift to the equipment categories, an Hour meter field on each piece of equipment, and a Tagged out checkbox that shows on the board. Change the request page wording to say forklift and yard. Then add a Daily check page where an operator picks a truck and marks each line OK or Defect.
Every version is saved, so you can roll back in one click, and the app opens in any browser, including a phone’s. If your checks already live in a spreadsheet, upload them with spreadsheet to app instead, and the records go into your app’s own built-in database. No account is needed to try it.
GoodTaco is free to start. Paid plans start at $9 a month, and Pro at $49 a month includes 10 users; bigger teams talk to us about Enterprise.
Get every failed forklift check fixed, signed off and on record. Start free, no credit card needed.
Frequently asked questions
Is a daily forklift inspection required by OSHA?
Yes. Under 29 CFR 1910.178(q)(7), forklifts must be examined before they are placed in service, at least daily, and after each shift where they are used around the clock. A forklift whose examination shows a condition that affects safety can't be used, and defects must be reported and corrected right away. The rule covers general industry; construction has its own section.
How often should a forklift be inspected?
Before it is used, at least once a day. If a forklift runs around the clock, it is examined after each shift. Planned maintenance, such as oil changes and hydraulic service, follows the intervals in the manufacturer's manual and is separate from the daily check.
Does OSHA require forklift inspections to be written down?
No. In a 2000 letter of interpretation, OSHA said there is no requirement that the daily examination be recorded in writing on a checklist, and a 2004 letter said no specific checklist is required. OSHA's own forklift guidance still says problems should be recorded on a log and reported to a supervisor, and a signed sheet shows the check was done. OSHA sets no retention period for it, so decide how long you keep sheets and write it into your safety program.
What should be on a forklift pre-shift inspection checklist?
With the key off: leaks, tires, forks, mast and chains, hoses, the overhead guard, backrest and finger guards, the capacity plate and decals, fluid levels, the seat belt and the manual. With the truck running: accelerator, brakes, steering, forward and reverse, tilt, lift and lower, attachments, horn, lights, back-up alarm and hour meter. Electric trucks add battery checks, and propane trucks add the tank, relief valve and hose.
What do you do if a forklift fails its inspection?
Stop using it. OSHA requires a forklift that is defective or unsafe to be taken out of service until it is restored to safe operating condition, and repairs are made by authorized personnel. Park it, take the key, tag it out, report the defect to your supervisor, write it up so the repair has an owner, and put it back in service only after it is fixed and checked.
How often do forklift operators need to be evaluated?
At least once every three years, under 29 CFR 1910.178(l)(4)(iii). Refresher training is also required after unsafe operation, an accident or near miss, a poor evaluation, assignment to a different type of truck, or a workplace change that affects safe operation. The employer certifies each operator's training and evaluation in writing.
Do electric and propane forklifts need different inspection checklists?
The operating checks are the same, but the key-off checks differ. Electric trucks add the battery, its cables and restraints, the electrolyte level and the hood latch. Propane trucks add the tank mounting, the relief valve pointing up, the fuel hose and connectors, and engine checks such as oil, coolant, belts and the air cleaner. Many shops keep one printed sheet per truck type.
Start from the work orders template
Get your own copy of a working work orders app with sample records, ready to make yours. Free to start.
Use the template, free