OSHA inspection checklist: a monthly self-inspection for a small business
A free OSHA inspection checklist to print: nine areas to walk each month, OSHA's most-cited standards, what an inspection looks like, and how to fix findings.
Start from the work orders template
Take requests, assign jobs, track them to done.
On this page
An OSHA inspection checklist is a walk through your workplace, area by area, that finds hazards before an inspector does: exits and fire protection, electrical, machine guards, floors, chemicals, protective gear, first aid, forklifts and records. Do it monthly, write down every finding, and give each one an owner and a due date.
It’s for the owner or safety lead at a shop, warehouse or contractor with 10 to 100 people who wants a monthly walk-through that actually gets done, and wants to know what happens if OSHA visits. Below: a checklist to print, OSHA’s most-cited standards, how findings become fixes, and what an inspection looks like. This is general information, not legal advice, and a clean sheet doesn’t mean you comply.
How we researched this: OSHA’s own pages and rule text, its small business handbook, fact sheets and penalties page, checked November 2026. States with their own OSHA-approved plans can differ.
Want each finding to become a job with an owner and a due date? GoodTaco’s work order template does that. See keeping findings on a board below.
What goes on an OSHA self-inspection checklist?
Print the PDF above. This page has the same lines plus a “Write it up if” column for what counts as a defect. Walk each area once a month with a pen and mark every line OK, Defect or N/A (not applicable). The nine areas follow the checklists in OSHA’s and the National Institute for Occupational Safety and Health’s Small Business Safety and Health Handbook, shortened for a shop floor.
Two limits come straight from OSHA. The handbook’s checklists are for general industry, not construction or maritime work. And OSHA says not to use them to assess compliance: they find hazards, they don’t certify anything. A contractor’s job sites fall under the construction rules, 29 CFR 1926. Your shop, yard and office can use this sheet.
Exits and fire
Walk every exit and the path to it, then check the fire gear.
| Check | Write it up if |
|---|---|
| ☐ Exit doors open from the inside, with a clear path to each | Locked, chained, or blocked by stock, pallets or carts |
| ☐ Exit signs lit, and doors that aren’t exits marked | A sign is dark or missing, or a storeroom door looks like an exit |
| ☐ Emergency lights work | A light fails the 30-second monthly test |
| ☐ Fire extinguishers in place, charged and monthly check recorded | Missing, blocked, pin or seal gone, gauge out of the green, or no check recorded |
| ☐ Oily rags and flammables stored right | Oily rags outside a covered metal can, or flammable liquid left out |
Extinguishers have their own rules: a monthly visual check and an annual maintenance check with the date recorded (29 CFR 1910.157(e)). Our fire extinguisher inspection checklist covers them line by line.
Electrical
Look at panels, cords and tools.
| Check | Write it up if |
|---|---|
| ☐ Clear space in front of electrical panels | Less than 3 feet clear, or breakers not labeled |
| ☐ Cords and plugs | Frayed, taped, missing a ground pin, or run through a multi-plug adapter |
| ☐ Panel and box covers on, unused openings closed | A missing cover, or an open hole in a panel or box |
| ☐ Cord-connected tools checked before use | A damaged tool is still in use instead of tagged out |
Machine guarding
Do this with the machines off.
| Check | Write it up if |
|---|---|
| ☐ Guards on belts, pulleys, chains and gears | Missing, loose or removed |
| ☐ Guards where the work happens (saws, presses, shears, drills) | Missing or bypassed |
| ☐ Emergency stops and power shut-offs within the operator’s reach | Blocked, out of reach or not working |
| ☐ Bench grinders | Wheel guard off, cracked wheel, or work rest (the support for the work) more than 1/8 inch from the wheel |
| ☐ Lockout locks and tags on hand | Missing, or a machine being serviced isn’t locked out |
| ☐ Lockout procedure inspected in the last 12 months | No inspection in the past year |
The lockout line ties to 29 CFR 1910.147, the rule on controlling hazardous energy. It requires the procedure to be inspected at least annually.
Walking surfaces
Floors, aisles, stairs and ladders.
| Check | Write it up if |
|---|---|
| ☐ Aisles and walkways clear | Stock, cords or hoses across them |
| ☐ Floors clean and dry | Oil, coolant or water not cleaned up right away |
| ☐ Stairs, platforms and guardrails | A loose rail, or an open edge four feet or more up with no guardrail |
| ☐ Floor holes and ladders | An uncovered hole, or a ladder with a bent rail or damaged feet |
OSHA’s rule says walking-working surfaces are inspected “regularly and as necessary,” and a hazard is fixed before anyone uses the surface again (29 CFR 1910.22(d)). If it can’t be fixed right away, block it off.
Chemicals and hazard communication
Include the cleaning products. Hazard communication is the OSHA rule on labels, safety data sheets and training.
| Check | Write it up if |
|---|---|
| ☐ Chemical list and written program current | A new product isn’t on the list |
| ☐ Safety data sheets (SDS) for every chemical | A sheet is missing, or kept where workers can’t reach it |
| ☐ Containers labeled | A faded label, or an unlabeled container where a label is required |
| ☐ Compressed gas cylinders | Unmarked, loose in a walkway, or valve cap off when not in use |
Personal protective equipment (PPE)
Watch what people wear, and what’s on the rack.
| Check | Write it up if |
|---|---|
| ☐ Eye and face protection | Not worn where chips, sparks or splashes are a hazard |
| ☐ Hearing protection | Not available or not worn where it’s loud |
| ☐ Gloves, safety shoes and hard hats | Wrong type for the job, worn through, or a cracked hard hat shell |
| ☐ Respirators, if anyone wears one | Medical evaluation, fit test or training is out of date |
First aid
Open the kit.
| Check | Write it up if |
|---|---|
| ☐ First aid kits stocked and easy to reach | Empty, expired or out of reach |
| ☐ Eyewash and shower where chemicals are handled | Blocked, or won’t run clear |
| ☐ A trained first aider on each shift, if no clinic is nearby | A shift with nobody trained |
| ☐ Emergency numbers posted | Missing or out of date |
Forklifts (skip if you have none)
Look at the paper as well as the trucks.
| Check | Write it up if |
|---|---|
| ☐ Daily check sheets filed | No sheet for a day a truck ran |
| ☐ Operator training and evaluation in date | Anyone past three years since the last evaluation |
| ☐ Horn, seat belt, overhead guard and capacity plate | Any one missing or not working |
| ☐ Trucks that need repair | Still in use instead of out of service |
The operator’s daily check is separate. Our forklift inspection checklist has it. This line only checks that the sheets are being filed.
Records and postings
Check the binder and the wall.
| Check | Write it up if |
|---|---|
| ☐ OSHA poster up | Not posted where workers can see it |
| ☐ Injury and illness log (Form 300) current | Behind, if your business has to keep one |
| ☐ Annual summary (Form 300A) posted Feb 1 to Apr 30 | Not up during those months |
| ☐ Training records on file | No record for hazard communication, forklifts or extinguishers |
| ☐ Last month’s findings | Any still open with no owner or due date |
Post the annual summary by February 1 and keep it up until April 30; a company executive certifies it (29 CFR 1904.32). Companies with 10 or fewer employees all of last year are generally exempt from keeping the log (1904.1). Some low-hazard industries are too, mostly offices, retail and services. Metal fabrication, warehousing and construction aren’t on that list (Appendix A).
Add these lines for your kind of workplace
The nine areas are general. Add the lines that fit, with the rule each comes from.
| Add these lines | Rule |
|---|---|
| Fabrication shop | |
| ☐ Hot work: fire watch where sparks could start a fire, kept 30 minutes after | 1910.252(a)(2)(iii) |
| ☐ Welding gas cylinders capped, stored safely, oxygen apart from fuel gas | 1910.253(b)(2), (b)(4) |
| ☐ Weld fume ventilation running | 1910.252(c) |
| ☐ Press brake and shear: point of operation guarded | 1910.212(a)(3)(ii) |
| ☐ Spray booth: fan on, filters changed, no flames or sparks, rags in metal cans | 1910.107 |
| ☐ Crane inspections up to date; slings checked before each use, a damaged sling out of service | 1910.179(j), 1910.184(d) |
| Warehouse | |
| ☐ Racking: no bent or struck uprights or beams, loads stable | 1910.176(b) |
| ☐ Dock: trailer wheels chocked, dock plate secure | 1910.178(k)(1) (chocks) |
| ☐ Battery charging area: designated, ventilated, spill gear on hand, no smoking | 1910.178(g) |
| ☐ Aisles and dock doorways wide enough for trucks | 1910.176(a) |
| Small construction contractor | |
| ☐ Fall protection, scaffolds and ladders checked before work | 1926.501, 1926.451, 1926.1053 |
| ☐ A competent person inspects the site and equipment regularly | 1926.20(b)(2) |
We found no OSHA rule just for racking; 1910.176(b) says stored material must not create a hazard. Skip the contractor lines unless you do construction work. On a job site the handbook’s checklists don’t apply, and the construction rules do.
Does OSHA require a workplace safety inspection, and how often?
Not as one monthly walk-through. We found no OSHA standard that sets a schedule for inspecting your whole workplace. The handbook recommends routine self-inspections, and particular standards require particular checks:
| Check | How often and rule |
|---|---|
| Forklift examination | Before use, at least daily (1910.178(q)(7)) |
| Fire extinguisher visual check | Monthly (1910.157(e)(2)) |
| Extinguisher maintenance check | Annually (1910.157(e)(3)) |
| Walking-working surfaces | Regularly and as necessary (1910.22(d)) |
| Emergency lights, where you have them | Monthly, 30 seconds (the handbook’s exit-route checklist) |
| This walk-through | Monthly (our suggestion) |
We suggest monthly because it matches the extinguisher check, and a hazard doesn’t sit more than four weeks. Pick the same day each month, like the first Monday, and take a second person. Start with last month’s open findings, then walk the nine areas. At a bigger site, give each area an owner and walk them all the same day.
The handbook doesn’t say to keep your sheets, and we found no OSHA rule that sets how long to keep them. A dated sheet shows what you found and when you fixed it, so keep them. Pick a period and write it into your safety program.
Which OSHA standards are cited most?
OSHA publishes the most frequently cited standards. Its list for fiscal year 2026 (October 1, 2025 to August 31, 2026) is preliminary, and the page gives ranks but no counts. Here is where each one lands on your sheet:
| Rank and standard | On your sheet |
|---|---|
| 1. Fall protection, construction (1926.501) | Construction only |
| 2. Hazard communication (1910.1200) | Chemicals and hazard communication |
| 3. Lockout/tagout (1910.147) | Machine guarding: locks and tags |
| 4. Scaffolding, construction (1926.451) | Construction only |
| 5. Ladders, construction (1926.1053) | Walking surfaces: ladders |
| 6. Respiratory protection (1910.134) | PPE: respirators |
| 7. Powered industrial trucks (1910.178) | Forklifts |
| 8. Fall protection training, construction (1926.503) | Construction only |
| 9. Eye and face protection, construction (1926.102) | PPE: eye and face protection |
| 10. Machine guarding (1910.212) | Machine guarding |
Five of the ten are general industry rules, and each has a line on your sheet. The other five are construction rules.
What happens during an OSHA inspection?
Normally OSHA doesn’t call ahead, and you have the right to ask the compliance officer to get an inspection warrant before entering (OSHA inspections fact sheet). OSHA says it goes to the most hazardous workplaces first: imminent danger, then reported deaths and serious injuries, worker complaints, referrals, targeted industries and follow-ups. You must report a work-related death within 8 hours, and a hospitalization, amputation or loss of an eye within 24 hours.
On the day, it goes in this order:
- Credentials. The officer shows a photo ID with a serial number.
- Opening conference. The officer says why OSHA picked you and what the inspection covers. You choose a representative to walk along, and employees may have one too.
- Walkaround. You walk the covered areas together. The officer reviews your injury records and the OSHA poster, and may talk privately with some employees.
- Closing conference. The officer goes over the findings and your options.
- Citations, if any. OSHA must issue a citation and proposed penalty within six months of the violation. You can ask for an informal conference, or contest in writing within 15 working days of receiving it.
If the officer points out something you can fix on the spot, fix it. OSHA says it still has to be cited, but prompt correction is a sign of good faith. A citation is posted near the affected area until the violation is fixed or for three working days, whichever is later (29 CFR 1903.16).
Penalties run up to $16,550 per serious violation and up to $165,514 for willful or repeated ones. OSHA’s May 2026 memo kept the 2025 amounts for 2026. OSHA also says it reduces penalties for small employers and for good faith. States with their own plans can differ.
Our advice: know where four things are before any visit. The walkaround reviews your injury records and the poster, so keep your training records and the safety data sheet (SDS) binder just as handy. The sheet checks all four: the SDS line under chemicals, and the log, poster and training records under Records and postings.
Can OSHA help you before it inspects?
Yes. OSHA’s On-Site Consultation program is run by states, is free, and is confidential and separate from enforcement. It’s for small and medium-sized businesses, and it helps you identify hazards and fix them. Look there before a hazard turns into a citation.
How do you turn findings into fixes?
A finding that goes in a notebook and nowhere else gets found again next month. Each one needs an ID, an owner and a date.
- Write it as one line. What is wrong and where: “SI-01: pallets block the back exit door, Bay 2.”
- Stop the danger first. Block off a hazard you can’t fix now, or lock out the machine.
- Pick a priority and one owner. The priority sets the due date (below). The owner is a person, not “maintenance.”
- Fix the cause. Pallets back at the exit next month mean the shop needs somewhere to put them.
- Check it yourself, then close it. Walk back, see it fixed, write the date. Open next month’s sheet with anything still open.
The priority levels and due dates are our suggestion. They match the four levels in GoodTaco’s work order template.
| Priority and use | Fix by |
|---|---|
| Urgent: blocked exit, exposed live wire, a guard missing on a machine in use (lock it out now) | Same day |
| High: a hazard you’ve blocked off but must fix | Next day |
| Normal: paperwork and hazards with no one at risk today, like missing SDS | 7 days |
| Low: housekeeping and small upgrades | 14 days |
Example: an invented 30-person fabrication shop with two forklifts walks its nine areas on Monday, November 2, 2026 and finds three things. By November 12, two are done and one is late.
| Finding | Fix, owner and result |
|---|---|
| SI-01: pallets block the Bay 2 exit | Pallets moved, floor box painted. Luis, Urgent, done Nov 2 |
| SI-02: drill press belt guard off | Machine locked out, guard refitted. Priya, High, done Nov 3 |
| SI-03: SDS binder missing two sheets | Sheets requested from supplier. Dana, Normal, due Nov 9, still open |
SI-03 is the one to chase. In the Excel tracker, the Overdue column flags it on its own, so you see it on the first line of the next walk.
Keep every safety finding on a board with an owner
In the example shop, SI-01 became a job with an owner and a due date the minute it was written. GoodTaco’s work order template does that. Sign up free and you land in your own copy: clear the sample records, then add your shop as a site.
- Each finding is a work order. The priority sets the due date, it shows in one technician’s My work, and it closes with what was done, the hours and the parts cost.
- Extinguishers and eyewash are equipment. Each keeps its location, serial number, install date and its own work order history. A “Monthly safety walk” can repeat: each one is created 7 days before it’s due (the default) when someone who can edit opens the app.
- Anyone can report a hazard from a phone. Publish the app and share its request link. Only people signed in to your GoodTaco workspace can open the board and the work orders. Anyone else who has the link gets the request page and nothing more.
Ask GoodTaco to add what makes it a safety walk:
Add Area to each work order with the nine areas from my safety sheet. Change the request page wording to say safety concern. Then add a Safety walk page where I pick an area, mark each line OK or Defect, and turn every Defect into a work order with a photo.
If your findings already live in a spreadsheet, upload it with spreadsheet to app and the records go into your app’s own built-in database. No account is needed to try it. Every version is saved, with one-click rollback. For paper, our free work order template comes in Word, Excel and PDF.
GoodTaco is free to start. Paid plans start at $9 a month, and Pro at $49 a month includes 10 users; bigger teams talk to us about Enterprise.
Get every safety finding fixed, signed off and on record. Start free, no credit card needed.
Frequently asked questions
What should be on an OSHA inspection checklist?
Walk the workplace area by area: exits and fire protection, electrical, machine guarding, walking surfaces, chemicals and hazard communication, protective equipment, first aid, forklifts and records. OSHA and NIOSH publish self-inspection checklists for these topics in their Small Business Safety and Health Handbook. They are for general industry, not construction, and OSHA says not to use them to judge whether you comply.
Does OSHA require a workplace self-inspection?
We found no OSHA rule that requires a whole-workplace walk-through on a set schedule. OSHA's handbook recommends routine self-inspections, and specific standards require specific checks: fire extinguishers visually inspected monthly, forklifts examined at least daily, and walking-working surfaces inspected regularly. A monthly walk-through is our suggestion.
How often should you do a safety inspection?
Monthly works for most small shops: it lines up with the monthly extinguisher check and keeps hazards from sitting. Checks the rules set more often still apply, such as the daily forklift examination. Do the monthly walk on the same day each month, and follow up on last month's open findings first.
Does OSHA have an official self-inspection checklist?
Yes. The OSHA-NIOSH Small Business Safety and Health Handbook has self-inspection checklists on topics such as exit routes, fire protection, electrical safety, machine guarding, hazard communication, PPE and first aid. OSHA says they are a starting point for general industry, not an all-inclusive list, and should not be used to assess compliance with the OSH Act or OSHA standards.
What happens during an OSHA inspection?
Inspections normally come without advance notice. The compliance officer shows credentials, holds an opening conference, walks through the workplace with an employer representative and reviews injury records and the OSHA poster, then holds a closing conference. Citations, if any, follow later, and you can ask for an informal conference or contest within 15 working days of receiving them.
What are the most cited OSHA standards?
On OSHA's preliminary fiscal year 2026 list (October 1, 2025 to August 31, 2026), the top ten are fall protection, hazard communication, lockout/tagout, scaffolding, ladders, respiratory protection, powered industrial trucks, fall protection training, eye and face protection, and machine guarding. Five of the ten are construction standards.
Can OSHA help a small business before an inspection?
Yes. OSHA's On-Site Consultation program is run by states, is free and confidential, and is separate from OSHA enforcement. It helps small and medium-sized businesses find hazards, build safety programs and train workers. Contact your state's program through osha.gov/consultation.
Start from the work orders template
Get your own copy of a working work orders app with sample records, ready to make yours. Free to start.
Use the template, free