Back to blog
Jobs, stock and customers

HVAC work order template: the fields techs fill in and how to choose an app

Free HVAC work order template in Word, PDF and Excel: the fields techs fill in, a seasonal maintenance checklist, refrigerant records and what HVAC apps cost.

Start from the work orders template

Take requests, assign jobs, track them to done.

Use the template, free
On this page

An HVAC work order records one visit to one system: the customer and address, the equipment card (make, model, serial number, tonnage, refrigerant and filter size), the complaint, the technician’s diagnosis and readings, refrigerant added, parts and labor, and the customer’s approval of any extra work. Fill it in at the job, then bill from it.

This guide is for the owner or dispatcher at a small HVAC company (3 to 15 technicians) running service calls and maintenance agreements, and for in-house facilities crews looking after boilers and rooftop units. It gives you the fields, the readings, the seasonal checklists, what EPA says to record about refrigerant, and a price check on the apps.

How we researched this: in November 2026 we read EPA’s refrigerant pages and rules, ENERGY STAR’s maintenance checklist, Trane’s maintenance plan page and each app’s own pricing page. Prices are from each vendor’s US pricing page on November 20, 2026. The customer, technician, school and numbers in the examples are made up.

If you’d rather skip paper, GoodTaco’s work order template is a working app with the same flow. It’s covered at the end.

What goes on an HVAC work order?

Eight blocks, in the order a call goes. The example column is WO-1648, a no-cooling call on a three-ton split system.

BlockExample: WO-1648
Customer and jobDana Whitfield, 312 Alder Lane. Aug 12, 2026, technician Luis Ortega
Complaint”Upstairs won’t cool. Ran all night, 78° at 7 am.”
Equipment cardCarrier 24ACC636, serial 2418E31207, 3 ton, R-410A, filter 16x25x1, installed 2018
DiagnosisLow charge: valve core leaking at the suction service port
Work doneReplaced the core, leak-checked, added refrigerant, re-read
Refrigerant addedR-410A, 2.25 lb
Parts and laborCore and refrigerant $183.00. Labor 1.5 hours at $140 is $210.00. Total $393.00
ApprovalUp to $425, approved by Dana Whitfield by phone, 9:05 am

A few of these earn their place on every call:

  • The equipment card is what you’d otherwise read off the data plate again next visit. Copy it once per system. Add the metering device (TXV or piston), because the charging target depends on it and on the manufacturer’s instructions.
  • The complaint in the customer’s words keeps the diagnosis honest. “Won’t cool upstairs” and “compressor failed” are different jobs.
  • The approval line is for extra work. Write the dollar limit, who approved it, and how and when (phone, text, in person). If the work goes past it, call again and write the new limit.
  • The name on the paper varies. A work order is the job, a service ticket or report is the tech’s record of the call, and the invoice is the bill. Jobber’s template page defines a work order as work still to be done and an invoice as the request for payment (Jobber). On a small crew one form does the first two, and its number goes on the invoice. Our work order template guide covers numbering.

What readings should a tech write down?

Write the reading, and beside it the target from the data plate or the manufacturer, so the next technician sees what changed. A reading with no target is only a number.

ReadingUnitBefore / after
Return air°F78 / 78
Supply air°F66 / 60
Temperature split°F12 / 18
Outdoor air°F91 / 91
Suction pressurepsig98 / 118
Head pressurepsig312 / 355
Superheat°F24 / 10
Subcooling°F4 / 10

The split is return minus supply. Add static pressure, and motor voltage and amps against the nameplate; ENERGY STAR’s list for a contractor’s annual check includes measuring motor voltage and current (ENERGY STAR). On a furnace, add gas pressure and a carbon monoxide test. WO-1648 reads straight off the first column: high superheat, low subcooling and a weak split point at low charge, and the leak had to be found before refrigerant went in.

Keep the “after” column even on easy calls. It’s what you point to when a customer says the system was fine before you came.

What does EPA say to record about refrigerant?

For a house split system or heat pump, EPA’s HFC leak repair rules don’t apply: they exclude the residential and light commercial air conditioning and heat pump subsector. Certification and disposal records still do. The rest depends on the system. This summarizes EPA’s pages and rules, and EPA says its fact sheets are for information.

SystemWhat gets recorded
Any, if you handle refrigerantYou’re certified, and keep a copy of your certificate until three years after you leave the trade (EPA)
Disposing of more than 5 and less than 50 lbLocation, date and type recovered; monthly quantity; where it went (EPA)
50 lb or more of R-22 or another ozone-depleting refrigerant (since 2019)A service record to the owner with refrigerant added. Owner keeps it 3 years (40 CFR 82.157)
15 lb or more of an HFC such as R-410A, not a house AC or heat pump (from Jan 1, 2026)Leak rate each time refrigerant is added, repairs, tests. Records 3 years (40 CFR 84.106)

Rooftop units are the gray area. EPA’s pages don’t say where they fall, so if one holds 15 pounds or more of an HFC, read 40 CFR 84.106 or ask EPA before assuming it’s exempt (EPA fact sheet). Either way, write the refrigerant type and pounds added on every ticket. It’s the number a leak-rate calculation needs.

What goes on an HVAC maintenance checklist?

Print this on the back of the work order for a tune-up or an inspection. It follows ENERGY STAR’s list of what a contractor checks once a year, cooling in spring and heating in fall, and the items Trane lists for a maintenance plan visit (ENERGY STAR, Trane). Mark each line OK or Fix, and write the reading or the fix in the notes.

Every visit

☐ Thermostat settings and operation checked
☐ Air filter checked, changed if dirty
☐ Electrical connections tightened, motor voltage and amps measured
☐ Moving parts lubricated
☐ Condensate drain checked, flushed if needed
☐ Controls and starting cycle checked

Cooling visit (spring)

☐ Evaporator and condenser coils checked, cleaned if needed
☐ Refrigerant level checked, adjusted if needed
☐ Blower cleaned and adjusted, airflow checked

Heating visit (fall)

☐ Gas or oil connections and gas pressure checked
☐ Burner combustion checked
☐ Heat exchanger inspected
☐ Carbon monoxide tested

Boiler visit (fall)

☐ Water temperature and pressure recorded
☐ Low-water cutoff tested
☐ Flame safeguard tested
☐ Stack temperature and combustion checked

Before you open a unit

☐ Power locked out and tagged before opening the unit
☐ Roof access arranged, building contact told

For boilers, follow the manufacturer’s manual and your state’s boiler rules; the four boiler lines are the ones to write down, not a substitute for either. For commercial buildings, ANSI/ASHRAE/ACCA Standard 180 sets minimum inspection and maintenance requirements for commercial building HVAC systems (ANSI). Our preventive maintenance checklist has a schedule layout to adapt.

How do you run maintenance agreement visits?

Most plans include two visits a year, one in spring before cooling season and one in fall before heating season; Trane’s page says that holds for AC-and-furnace and heat pump systems alike. Book early: ENERGY STAR notes that contractors get busy once summer and winter come.

Give each visit its own work order number on the same equipment card. You get a due list of every system and whether its visit is done, and one history per system, so last spring’s readings sit beside this spring’s. The board below is five visits from a spring round.

What changes for an in-house facilities crew?

You have no customer to approve extra work and no invoice. You have a requester, a building and a budget. Same form, different fields:

Contractor formIn-house form
Customer and addressBuilding, room and unit ID (RTU-3, roof, north wing)
ComplaintRequest from staff: who asked and where
Approved up to, by customerPO or budget code, approved by the building manager
InvoiceCost center: hours and parts charged to the building
Maintenance agreementPreventive maintenance by season, building and unit
One filter sizeFilter sizes and quantity, belt size

An example: WO-1652, Lincoln Elementary, RTU-3, no cooling in the library, requested by the front office, charged to cost center 4120. High priority, with the building contact told before the tech goes on the roof. In a school, a no-heat call in January also needs to say who’s in the room.

What does an HVAC work order app cost?

An app earns its price when techs fill in tickets on their phones and the office stops retyping them. Prices are as listed on each vendor’s US pricing page on November 20, 2026, for 5 users where the plan counts users.

AppListed price per month
Jobber Connect$149 billed yearly, $199 monthly
Housecall Pro Essentials$149 billed yearly, $189 monthly
Service Fusion Starter$220 billed yearly, $259 monthly, unlimited users
ServiceTitanNot published. Per-technician pricing
FieldEdgeNot published. Request pricing

Count the office: a crew of 5 plus a dispatcher is 6 seats. Jobber lists $29 a month for an extra user, Housecall Pro’s Essentials lists 5 users and no price for a sixth, and Service Fusion doesn’t change with seats. Both Jobber and Housecall Pro list a 14-day trial. Housecall Pro lists Recurring Service Plans, its maintenance agreement feature, on Max: $299 a month billed yearly for 8 users.

Which we’d look at first. For a contractor with 3 to 8 technicians, Jobber or Housecall Pro: both publish prices, so you can test a week of real calls. Jobber’s page mentions annual maintenance visits, inspection checklists and service agreements attached to client files (Jobber). From about 10 technicians, Service Fusion’s flat price doesn’t grow with each hire. Above that, or for dispatch boards, ask ServiceTitan and FieldEdge for quotes. An in-house crew with no customers to bill will do better with the maintenance-style tools in our work order app guide, or the template below.

Run service calls and tune-ups from GoodTaco’s work order template

WO-1648 took a phone call, a paper ticket and a retype at the office. In GoodTaco’s work order template it lives on one page. Sign up and you land in your own copy, with sample records that include a Carrier 48TC 5-ton rooftop unit and a repeating filter change. Rename them to your customers or buildings, or clear them.

  • Each address or building is a site, and each system is equipment in the “Heating and cooling” category, with make and model, serial number, install date and its own work order history.
  • Calls come in through a request page anyone can use, once you publish the app with its public link. Only people signed in to your GoodTaco workspace can open the board and the work orders; anyone else who has the link gets the request page and nothing more. Urgent is due the same day, High the next day, Normal within 7 days, Low within 14. My work shows one technician’s jobs, with hours and parts cost recorded at close-out.
  • Tune-ups are repeating jobs, one per system. Each work order is created a set number of days before it’s due (7 by default) when someone on your team who can edit opens the app.

Ask GoodTaco for the HVAC fields:

Add Tonnage, Refrigerant type and Filter size to each piece of equipment. On the close-out, add supply and return air temperature, suction and head pressure, superheat, subcooling and refrigerant added in pounds. Add an “Approved up to” amount and “Approved by” to each work order.

Every version is saved, with one-click rollback, and the app opens in any browser, including a phone’s. If your calls already live in an Excel or CSV file, turn the spreadsheet into an app instead; the records go into your app’s own built-in database. No account is needed to try it.

GoodTaco is free to start. Paid plans start at $9 a month, and Pro at $49 a month includes 10 users; bigger teams talk to us about Enterprise.

Give every service call one number, one equipment card and one list of what’s due. Start free, no credit card needed.

Frequently asked questions

What should an HVAC work order include?

The customer and address, the equipment card (make, model, serial number, tonnage, refrigerant type, metering device and filter size), the complaint in the customer's words, the technician's diagnosis and readings, the work done, refrigerant added, parts and labor, and who approved any extra work and when. A maintenance visit adds a checklist for the season. An in-house crew swaps the customer and invoice for the building, unit ID, requester and a cost center.

What is the difference between an HVAC work order, a service ticket and an invoice?

Companies use the words differently. A work order describes the job to be done and records what was done. A service ticket or service report is the technician's record of the call, and often the same document. An invoice is the bill, and it comes after the work. Some small shops use one form for all three. Whatever you call it, put the work order number on the invoice.

What readings should an HVAC technician write down on a service call?

Return, supply and outdoor air temperatures, suction and head pressure, superheat and subcooling, static pressure, and motor voltage and amps. On a furnace, add gas pressure and a carbon monoxide test. Write each reading beside the target from the equipment's data plate or the manufacturer, so the next technician can see what changed.

Do HVAC technicians have to keep refrigerant records?

Some records, depending on the system. A technician who disposes of a system holding more than 5 and less than 50 pounds records the location, date and type recovered. For 50 pounds or more of an ozone-depleting refrigerant such as R-22, the servicer gives the owner a service record that includes the refrigerant added, and the owner keeps it 3 years. For 15 pounds or more of an HFC such as R-410A, EPA's leak repair rules since January 2026 apply, except to residential and light commercial air conditioning and heat pumps. Even where it isn't required, write the refrigerant type and pounds added on every ticket.

What goes on an HVAC maintenance checklist?

Every visit: thermostat, filter, electrical connections, moving parts, condensate drain, controls and starting cycle. A cooling visit adds coils, refrigerant level and blower. A heating visit adds gas or oil connections and gas pressure, burner combustion, the heat exchanger and a carbon monoxide test. Boilers add water temperature and pressure, a low-water cutoff test, a flame safeguard test and stack temperature.

How much does HVAC work order software cost?

In November 2026, listed prices for 5 users were $149 a month billed yearly for Jobber Connect ($199 on monthly billing), $149 for Housecall Pro Essentials ($189 on monthly billing) and $220 for Service Fusion Starter ($259 on monthly billing, with unlimited users). ServiceTitan and FieldEdge don't publish prices.

Is there a free HVAC work order template?

Yes. This guide has one in Word, PDF and Excel, with the equipment card, readings, refrigerant added, parts, labor, approval of extra work and checklists for the season, boilers and safety. GoodTaco's work order template is a working app you can start from, and GoodTaco is free to start.

Free template

Start from the work orders template

Get your own copy of a working work orders app with sample records, ready to make yours. Free to start.

Use the template, free

Or turn your own sheet into an app

Keep exploring

Related guides and templates

View all articles

Guide

Electrical work order: form, permits and inspections

Free electrical work order form in Word, PDF and Excel, with permit and inspection fields, change orders, a facility safety checklist and software prices.

Guide

What is a work order? Types, fields, process and example

A work order is the record that approves one job and tracks it to done. See the fields to copy, the 4 types, the 6 steps and a filled-in example.

Guide

Work order template: free Word, Excel and PDF form

Download a free work order template in Word, Excel or PDF, with request, assignment and close-out fields, a filled-in example and how to number each job.

Industry

Supply Chain Software Built From Your Spreadsheet

Build supply chain management software from the spreadsheets your team already runs, purchase orders, vendor tracking, risk flags. No ERP migration. Deploy in minutes.